肥煤自燃全过程热动力学特征参数研究

实验测定了林西矿肥煤样品30~900℃煤自燃全过程热动力学特征参数,得出:TG/DTG曲线显示煤样DTG初始临界温度45℃,干裂温度122℃,活性温度195℃,增速温度265℃,质量极大值温度342℃,着火温度465℃,最大热失重速率温度515℃和燃尽温度690℃;DSC曲线显示,煤样初始放热温度60℃、最大热释放速率温度511℃。结合TG-DTG-DSC曲线综合分析可知,煤温达到510℃左右时煤样反应最剧烈。由煤自燃标志气体测定实验系统得出:煤温130℃后CO,CO 2释放量迅速增加,210℃增加速度下降;CH 4,C 2 H 6含量变化具有规律性且两者变化相近;C 2 H 4出现温度为130℃;C 2 H 4/C 2 H 6比值在190~350℃有较强的规律性,呈上升趋势且上升速度较快;350℃之后,CH 4,C 2 H 6,C 2 H 4体积分数均开始急剧增大;C 2 H 4/CO与C 2 H 4/CO 2变化趋势大致相同,在130~350℃时缓慢增长,达到350℃后比值呈指数形式上升。经拟合曲线,得到活化能的3个突变点温度:70,180,220℃,其中180℃与交叉点温度相吻合。通过以上研究,得到了肥煤自燃全过程的热力学特征参数,为实际生产中防治煤自燃提供了理论依据。     

The passion bug: How and when do leaders inspire work passion?

Drawing from signaling theory, we propose a work passion transfer model where leaders' passion is transmitted to employees through the former's leadership style and is contingent on employees' perceived importance of performance to self-esteem (IPSE). Data from 201 supervisor–employee dyads from the health-care industry show that leaders' harmonious passion led to employees' harmonious passion through charismatic leadership, whereas contingent reward leadership accounted for the transfer of obsessive passion; IPSE did not play a moderating role for either form of passion. Results from a supplementary study further reveal that the link between leadership and employee passion operated through employees' perception of leader passion and that employees' IPSE accentuated for the relationship between perceived leader obsessive passion and employees' obsessive passion. This study advances research in work passion, leadership, and signaling theory and provides important implications for managerial practice.     

“Science is Everywhere,but No One Knows It”: Assessing the Cultural Distance to Science of Rural South African Publics

ABSTRACT

In science communication, a prerequisite for reaching different parts of a society is to find out how these publics experience and interpret science. Since rural South African publics are perceived to exhibit a large cultural distance to science, the present exploratory study aimed to know in more detail how rural South Africans perceive and understand science in their local and social contexts. Theoretical notions on cultural distance and the methodological approach of segmentation studies were considered. Semi-structured interviews with rural South Africans were carried out in four towns (n?=?52) that differ with respect to having a large scientific installation in their vicinity, or not. Sensitively comparing local and social contexts helped identifying three different publics who differed regarding their perceptions of science; however, the large scientific installations only made a difference in perceptions for those publics who were generally less exposed to and less knowledgeable about science.     

近15a江苏省水源涵养功能时空变化与影响因素探析

定量评估生态系统服务功能是合理利用自然资源、促进人地关系与可持续发展的基础。以江苏省为研究区，基于InVEST模型产水模块，定量分析了江苏省2000~2015年产水功能和水源涵养功能的时空变化特征，并采用回归分析和主成分分析法评估了水源涵养功能与社会经济要素之间的关系。结果表明：（1）江苏省多年平均产水量为571×108 m³/a，水源涵养总量78.39×108 m³/a；（2）2000~2010年江苏省水源涵养功能呈下降趋势，2010~2015年有所回升，考虑到降水因素，江苏省实际水源涵养功能持续降低；（3）土地利用变化使15a来水源涵养功能下降15.2×108 m³，降低幅度为16.9%；（4）流域尺度上水源涵养功能与江苏社会经济因素相关关系不显著。研究结果可以为土地利用优化、流域水资源管理提供科学参考和支持。     

植物内重金属的赋存形态及分布特征分析方法研究进展

植物内重金属分析不仅有助于阐述重金属迁移转化规律,揭示植物修复机理,也是监测评价大气、水及土壤环境重金属污染状况的重要依据。研究针对植物样品中重金属赋存形态及分布特征的分析方法进行综述,分别介绍了其原理、优缺点及应用。提出制定统一高效的分析检测方法,深化植物内重金属的赋存形态及分布特征与环境相关性的研究以及建立数据共享平台是植物样品重金属信息分析方法的未来发展方向。     

Improving pedestrian safety using combined HOG and Haar partial detection in mobile systems

Objective: The objective of this study is to develop a novel algorithm on a mobile system that can warn drivers about the possibility of a collision with a pedestrian. The constraints of the algorithm are near-real-time detection speed and a good detection rate.

Method: Histogram of gradients (HOG)-based detection is widely used in pedestrian safety applications; however, it has low detection speed for real-time systems. Hence, it has no direct usage for mobile systems. In order to achieve near-real-time detection speed, partial Haar transform predetections are applied to an image before HOG detection. The partial and HOG detections are merged and a score-based confidence level is defined for the final detection phase. In this way, the outcome is prioritized and different warning levels can be issued to warn the driver before a possible pedestrian collision.

Results: The proposed algorithm provides an increase in detection speed (from 46 to 76 fps) and detection rate (from 80 to 91%) with respect to HOG-based pedestrian detection. It also improves confidence of the results by multidetection merging and score assignment to detections.

Conclusions: Performance improvement of the algorithm is compared with respect to state-of-the-art detectors/algorithms. Based on the detection rate and detection speed performance, it can be concluded that the proposed algorithm is suitable to be used for mobile systems to warn drivers about the possibility of collision with a pedestrian.     

Usage of polystyrene disposable food dishes in the lightweight concrete making

The increasing use and subsequent accumulation of polystyrene containers has triggered a substantial environmental problem. This study investigated using varied percentages of solid waste polystyrene disposable food dishes in the production of lightweight concrete samples with 350 kilograms per cubic meter (kg/m³) of cement and a density of 1,300 kg/m³. The polystyrene disposable dishes were ground into beads of 0–3 millimeters (mm) and 3–6 mm in size. First, the characteristics of Type II Portland cement, polystyrene, and aggregates were examined. The following characteristics of concrete using ASTM International and British Standards Institution standards were tested: slump, compressive strength, ability to resist chloride ion penetration, and resistance of concrete to rapid freezing and thawing cycles. Scanning electron microscopy (SEM) and energy dispersive X‐ray spectroscopy analytical techniques were also used. The slump of samples varied between 40 and 70 mm and was not dependent on either the polystyrene percentage or the size of the polystyrene beads in the concrete samples (p‐value > .05). The compressive strength of the concrete samples after 90 days of curing, and using different percentages of polystyrene, varied between 96 and 113 kilograms per square centimeter (kg/cm²). The resistance of the samples to the freezing and thawing cycle and chloride ion penetration were affected unfavorably by the presence of the polystyrene. The SEM technique indicated that concrete samples containing 15% and 25% polystyrene had denser crystals and less void than concrete samples with 40% and 55% polystyrene.     

Effects of release pressure on the transportation characteristics in pipeline and the diffusion behaviors in enclosure space of typical gas extinguishing agent

Reducing the release pressure of fire extinguishing systems can decrease potential safety hazards in large transport airplanes. To explore whether reducing the release pressure can achieve the release effect required by the airworthiness standards or not, the transportation characteristics in the pipeline and diffusion behaviors in the enclosure space of a typical fire extinguishing agent (Halon 1301) were investigated under five release pressures in the present study. The effects of the release pressure on the degree of superheat, injection duration, jet structure, and concentration distribution of Halon 1301 were analyzed. The results show that both of the degree of superheat and the injection duration decrease with an increase in the release pressure. The supplement of bubble expansion in the fire extinguishing agent can slow down the pressure decrease in the vessel. Both of the maximum and mean values of the pipeline differential pressure increase with an increase in release pressure. The maximum value of the jet angle decreases linearly with the increase in release pressure, and the jet deflects upward owing to the effects of buoyancy. The maximum concentration value decreases with an increase in the distance from the nozzle. The maximum concentration values in the near field from the nozzle increase with an increase in the release pressure. Under five release pressures, the concentration and holding time (duration above 6% volume concentration) of Halon 1301 on the centerline of the jet meet the requirements of airworthiness provisions.     

Factors associated with driving under the influence of alcohol

Objective: This study examined the risk factors of driving under the influence of alcohol (DUI) among drivers of specific vehicle categories (DSC). On the basis of this research, the variables related to DUI and involvement in traffic crashes were defined. The analysis was conducted for car drivers, bicyclists, motorcyclists, bus drivers, and truck drivers.

Method: The research sample included drivers involved in traffic crashes on the territory of Serbia in 2016 (60,666). Two types of analyses were conducted in this study. Logistic regression established the correlation between DUI and DSC and the The Technique for Order of Preference by Similarity to Ideal Solution (Multi-criteria decision making) method was applied to consider the scoring and explore the potential for the prevalence of DUI on the basis of 2 data sets (DUI and non DUI).

Results: The study results showed that driver error and male drivers were the 2 most significant risk factors for DUI, with the highest scores and potential for prevalence. The nonuse of restraint systems, driver experience, and driver age are the factors with a significant prediction of involvement in an accident and an insignificant prediction of DUI.

Conclusions: Following the development of the logistic prediction models for DUI drivers, testing of the model was conducted for 3 control driver groups: Car, motorcycle, and bicycle. The prediction model with a probability greater than 50% showed that 77% of car drivers were under the influence of alcohol. Similarly, the prediction percentage for motorcyclists and bicyclists amounted to 71 and 67%, respectively. The recommendation of the study is that drivers whose DUI probability is above 50% should be potentially suspected of DUI. The results of this study can help to understand the problem of DUI among specific driver categories and detect DUI drivers, with the aim of creating successful traffic safety policy.     

顶空-气相色谱法(氮磷检测器)测定固定污染源废气中三甲胺

建立了顶空-气相色谱法测定固定污染源废气中三甲胺的分析方法。弱酸性吸收液采集固定污染源废气中的三甲胺,碱液中和后顶空进样气相色谱仪氮磷检测器分析。并对平衡温度、平衡时间、盐析效应、氨水和氢氧化钠条件实验进行优化,在最佳实验条件下,三甲胺的方法检出限为0. 46μg/m~3(以采集20 L空气样品计),加标回收率为97%～107%,相对标准偏差在9. 26%以下。利用该方法对垃圾焚烧发电厂厂界空气及鱼粉厂有组织废气中三甲胺进行检测分析,该方法能够满足国家标准及上海地方标准中三甲胺排放限值的要求。